Quick Start Guide | INFTYLAB Europe

Important

If you purchased a VESA adapter separately, follow the VESA adapter's Quick Start Guide.

Product overview

Product overview

Product overview

A. Arm assembly (clamp assembly pre-installed)｜B. Upper arm｜C. VESA cover｜D. Grommet assembly｜E. Cable clip｜F. Protective pad｜G. Base cover｜H. User documents｜I. 4 mm hex key｜J. VESA bracket screws × 4

Illustration of package contents

Illustration of package contents

Safety

1.Attach your display before lowering the arm.

2.Weight Capacity: 3.86 - 4.46 kg (8.51 - 9.83 lbs)

3.Have a second person help.

Safety instructions.

Safety instructions.

Content

Step 1. Choose A.Clamp or B.Grommet

Step 2. Mount your display

Step 3. Manage cables

Step 1. Choose A.Clamp or B.Grommet

A. Clamp

Clamp mounting environment.

Clamp mounting environment.

A1.

Slide the arm assembly (A) onto the edge of your desk.

Slide the arm assembly (A) onto the edge of your desk.

A2.

Skip to Step 2

Turn the mounting knob counterclockwise to secure it.

Turn the mounting knob counterclockwise to secure it.

B. Grommet

Grommet mounting environment.

Grommet mounting environment.

B1.

Use the 4 mm hex key to remove the clamp assembly from the lower bracket.

Use the 4 mm hex key to remove the clamp assembly from the lower bracket.

B2.

Detach the lower bracket from the bottom of the main pole.

Detach the lower bracket from the bottom of the main pole.

B3.

Separate the grommet bolt from the grommet assembly.

Separate the grommet bolt from the grommet assembly.

B4.

Secure the grommet bolt to the bottom of the base using the screws.

Secure the grommet bolt to the bottom of the base using the screws.

B5.

Lower the base over the desk hole.

Lower the base over the desk hole.

B6.

Thread the bottom plate and mounting knob from underneath, then turn counterclockwise to lock.

Thread the bottom plate and mounting knob from underneath, then turn counterclockwise to lock.

Step 2. Mount your display

Place your display face down on the protective pad (F).

Place your display face down on the protective pad (F).

1.

Align the upper arm (B) with the bracket, keeping the notches at the top. Secure it with the VESA bracket screws (J).

Align the upper arm (B) with the bracket, keeping the notches at the top. Secure it with the VESA bracket screws (J).

2.

Snap the VESA cover (C) into place.

Snap the VESA cover (C) into place.

3.

Lift the display to align and insert the upper arm pin straight down into the lower arm socket, then tighten the thumbscrew underneath to lock it securely.

Lift the display to align and insert the upper arm pin straight down into the lower arm socket, then tighten the thumbscrew underneath to lock it securely.

Step 3. Manage cables

Once your Studio Arm is set up, use the built-in cable management to keep your workspace clean.

Once your Studio Arm is set up, use the built-in cable management to keep your workspace clean.

1.

Leave at least 40 cm of cable slack to prevent cable strain or damage when adjusting or tilting the arm.

Route the display cables through the cable channel under the arm and down along the pole.

Route the display cables through the cable channel under the arm and down along the pole.

2.

Snap the cable clip (E) into the slots on the back of the pole to keep the cables in place.

Snap the cable clip (E) into the slots on the back of the pole to keep the cables in place.

3.

Route cables from your devices through the metal guide on the mount base.

Route cables from your devices through the metal guide on the mount base.

4.

Slide the base cover down over the mount to conceal the cables.

Slide the base cover down over the mount to conceal the cables.